egr b.s.
Thread Starter
|
Senior User
Joined: Nov 2002
Posts: 316
Likes: 0
From: ca
egr b.s.
I just purchased a used edelbrock performer off ebay and its non-egr, i have my original intake manifold and egr plate, could i just use the old egr plate and mount my old 2 barrel on it so i can get it smogged and then bolt on my 4 barrel?
Lead Driver
Joined: Nov 2000
Posts: 6,640
Likes: 349
From: Albuquerque
egr b.s.
[updated:LAST EDITED ON 19-Dec-02 AT 12:32 PM (EST)]Seems like it ought to work. Check the old plate closely for burn through area's.
Ooops, It wont have the exhaust passages in it.
Ooops, It wont have the exhaust passages in it.
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
egr b.s.
Leave the old 2V manifold on for smog tests. Keep the whole Man & 2V carb around for future inspections. One thing nice about the Cleveland series... A dry intake :-)
Thanks for using FTE!
[font color=red]As a Moderator I do not "Subscribe" to most topics,
please send email/pm if you need a reply -Thanks![/font]
-
Thanks for using FTE!
[font color=red]As a Moderator I do not "Subscribe" to most topics,
please send email/pm if you need a reply -Thanks![/font]
-
