'Auto' Window Switch
Thread Starter
|
Elder User
Joined: Mar 2007
Posts: 889
Likes: 2
From: I'm there!
'Auto' Window Switch
Any reason the switches in the doors to control the windows can't be changed to an 'auto' switch like for the driver's side window on driver's door panel.
I've wondered for a couple of days now. Anybody do this. I think all the windows going down 'automatically' would be tight...
Input PLEASE!!!
I've wondered for a couple of days now. Anybody do this. I think all the windows going down 'automatically' would be tight...
Input PLEASE!!!
Postmaster
Joined: Nov 2003
Posts: 3,595
Likes: 0
From: Utah County, UT
It isn't in the switch, if you look at the fuse box layout, one of the relays is for the one touch down, I have been wanting to do this for all four windows but haven't put that much time into it. Sounds like I should, wouldn't be the difficult to layout and add another box in either the door or under the dash for three more relays.
Laughing Gas
Joined: Jul 2003
Posts: 1,157
Likes: 1
From: Littleton, Colorado
All you need to do is get a power window auto roll up/down module like this one:
http://www.autotoys.com/x/catalog/PO...UXE_p_315.html
Austin
http://www.autotoys.com/x/catalog/PO...UXE_p_315.html
Austin
