Medford, Or
Senior User
Joined: Feb 2006
Posts: 235
Likes: 0
From: Albany, Oregon
There is a yard here that has several 66 F100's. Riverside in Albany, Oregon is owned by Glen. I keep getting slicks, take the parts I need and take them out to Glen who parts them out. There are currently two there. Both hoods are either taken or no good. There are at least two good doors and front fenders. Floor boards in one need replacement and ffloor pans and drip rails in the other are bad. Most of the interior gauges are still there with the exception of the ignition. One is a 240 and the other is a 300. Both ran very well when I drove them there. One has a 3 speed overdrive. Just what I remember......so if needed give him a call. I stopped at three other yards in the area last weekend and they looked at me like I fell out of the tree when I asked them about 61-66 F100.............oh well
New User
Joined: Feb 2004
Posts: 24
Likes: 0
Hi
There are a few of us around town, no formality to us though, just a wave in passing, not like the Mustang club. I have the '66 at Medford Tools on weekdays. If you go to the rod show this weekend, check with Ash Motorsports, Jeremy will know how to find me. Welcome
Senior User
Joined: Nov 2006
Posts: 230
Likes: 0
From: junction city or
The Trucks At The River Side Yard Still Have A Lot Of Good Parts The Hoods Are Sold And The Bumpers Too Butt The Green Truck Has Rusty Floor Pans But There Are A Lot Of Useable Parts Left Out There
Posting Guru
Joined: May 2005
Posts: 1,518
Likes: 3
From: Spokane, WA
I used to live in Medford, grew up in Klamath Falls, now I live in Santa Rosa, Ca with 3 slicks. They aren't real popular down here since they never built a hybrid version. Most go to the crusher. Always a couple in local pick-n-pull yard.
