Ranger Clutch Bleeding
Thread Starter
|
New User
Joined: Feb 2008
Posts: 1
Likes: 0
Ranger Clutch Bleeding
I need to bleed the clutch on a 94 Ranger. I have read other post that say to remove the master and make it level and another says to remove the circlip and let the air out by removing the piston. In either case it says to remove the clutch pushrod. I can not seem to get the rod loose at either end. I am afraid I am going to break it if I just pry it loose from the peddle. Any help would be appreciated.
Moderator
Joined: Dec 2003
Posts: 97,692
Likes: 2,024
From: Saskatoon, Saskatchewan
Welcome RDA, drop into the Ranger forum: https://www.ford-trucks.com/forums/forum35/
Check out your local KY chapter: https://www.ford-trucks.com/forums/forum151/
Check out your local KY chapter: https://www.ford-trucks.com/forums/forum151/
