marker lights
Senior User
Joined: Sep 2005
Posts: 359
Likes: 1
From: Saint Paul, MN
marker lights
I just measured the lights on my roof. Measure across the roof and find the center. Now draw a line from front to back. Now you will see a crease at the front of the roof where it starts to slope down to the windshield. Measure 7" from the crease toward the rear of the roof on the center line. That is where the front of the center marker light goes. Do you follow me? Now place a marker light there. Now make a 90 degree line across the roof from side to side at the back of the center marker light that you just placed there. The back of all of the marker lights will fall on this line. From the center line measure out from each side 9 1/2". That is where the back of the second light goes. From the center line measure out from each side 24" and that is where the back of the out board light goes. These are teardrop shaped lights and I believe they were from the factory. If these measurements are incorrect, would someone then correct me. I would post a photo but the posting rules at the bottom of the page will not allow me to. Hopes this helps you. Fords&Farmalls, if you need more information just send me a PM.
Last edited by tomcasino; Jan 31, 2008 at 04:12 PM. Reason: missing information
