Help - Oil Pump Drive Repositioning
Thread Starter
|
Tuned
Joined: Jun 2006
Posts: 363
Likes: 3
From: Graham WA
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Originally Posted by E30tdf
I have reassembled a rebuilt 302 and during the course of trying to verify the oil pump is generating pressure I have apparently lifted the drive rod up out of the pump and now I ca't get the drive tool or distributer on.
Is it remove the pan time or is there a way to reach it from above with a tool or such?
Thanks
Is it remove the pan time or is there a way to reach it from above with a tool or such?
Thanks
