Leveling kit installed
Thread Starter
|
Postmaster
Joined: Sep 2004
Posts: 3,916
Likes: 0
From: Bellingham, WA
Leveling kit installed
Just had the add-a-leaf installed on my 250 and now the front sits exactly level with the back. Great deal, but once I put anything in back it squats. Can I just add 350 blocks in the rear without much trouble? where do I find these? junkyard, online... Thanks in advance, I've got some nice rims and bigger tires on the way which is how this got started.
Fleet Mechanic
Joined: Sep 2006
Posts: 1,329
Likes: 0
From: IN
Yeah it's not hard just replace your 250 blocks with the 350 blocks. The junkyard would be the cheapest way to get them.
Just raise the back of the truck and support it with jackstands on the frame then put a jack under the rear pumkin loosen the u bolts and lower the rear axle enough to get the old blocks out and the new ones in.
Just raise the back of the truck and support it with jackstands on the frame then put a jack under the rear pumkin loosen the u bolts and lower the rear axle enough to get the old blocks out and the new ones in.
