Manual tranny work complete
Thread Starter
|
Junior User
Joined: Oct 2007
Posts: 68
Likes: 0
Manual tranny work complete
Some of you might remember a few weeks ago my transmission went. I have the 6spd. I found an aamco shop a few hours away that said they could fix just what was wrong with it.
2 bent shift forks and lotsa worn synchros.
Don't ask me how that happend!
I'm sure it had nothing to do with 2-3-4 gear burnouts or anything like that.
The good news is that 1500 later it shifts great again. And Now I have my Nitrogen system hooked up! More on that later.
2 bent shift forks and lotsa worn synchros.
Don't ask me how that happend!
I'm sure it had nothing to do with 2-3-4 gear burnouts or anything like that. The good news is that 1500 later it shifts great again. And Now I have my Nitrogen system hooked up! More on that later.
