Overhead console
Thread Starter
|
New User
Joined: Dec 2007
Posts: 3
Likes: 0
Overhead console
I pulled out the board on my overhead console today since it wasn't working. I noticed I am missing one of the resistor/chips that was soldered on the board. I need to know wich one is closest to the plug for the wiring harness i.e. is it the 620 or 680. Another way to look at it is if I have the board laying flat where the display is facing me and upside down, the resistor/chip is the farthest to the left.
I'd like to take it to the electronics repair store and would like to be able to tell them what to solder back in.
Thanks for any help
Jason
I'd like to take it to the electronics repair store and would like to be able to tell them what to solder back in.
Thanks for any help
Jason
Senior User
Joined: Sep 2004
Posts: 432
Likes: 0
From: Upstate NewYork
Here is the web site to repair the overhead display http://www.forgotton.net/diesel/trip...ndexframe.html
