Piping layout help...
Thread Starter
|
Posting Guru
Joined: Nov 2006
Posts: 1,154
Likes: 2
Piping layout help...
This post is too long to replicate here so I've linked it:
https://www.ford-trucks.com/forums/6...yout-help.html
I'm looking for input on installing the ESP pre/post luber and Oilguard bypass filter as integrated systems.
Thanks
https://www.ford-trucks.com/forums/6...yout-help.html
I'm looking for input on installing the ESP pre/post luber and Oilguard bypass filter as integrated systems.
Thanks
Thread Starter
|
Posting Guru
Joined: Nov 2006
Posts: 1,154
Likes: 2
Well fellas, I never got any input on this post about integrating the ESP luber with the Oilguard bypass filter. I think I'm going to go ahead and do it the way I was thinking about. I know I've found a source online for 1/2" male JIC to 1/2" male pipe and 1/2" female JIC swivel to 1/2" Push-Lock hose barb, but does anyone have an idea where I might be able to find these parts in a store? I'm going to drill and tap the billet oil filter cap for 1/2" NPT and drill and tap the street ell for 1/8" NPT to install the temp probe which I'll wire in to the selector switch for the tranny temp gage.
