Need part number if possible
Thread Starter
|
Elder User
Joined: May 2001
Posts: 760
Likes: 0
From: Billings, MT
Need part number if possible
I've blown out one of my coolant hoses. It's the short 4-5" elbow that is a couple inches in diameter that goes from the oil filter/cooler adaptor to the intake side of the water pump. In my town, there is an order of the places you go if you can't find something. I tried Schucks: thought they had the part, but it wasn't big enough; I tried B&B: they had everything listed but that hose; I tried Napa: they'd never heard of it; and today I stopped by Ford of Kirkland and they also could not help me. I've been truckless for 2 days now and I'm missing it. If anyone can get their hands on a part number for that, that'd be great, if not, I'll just bide my time until I can get to the big dealership in Snohomish to see if they have the part. Thanks for any help you can give.
The Law
1989 F-250 HD 4x4
460, C6, BW 13-56
Almost Stock
The Law
1989 F-250 HD 4x4
460, C6, BW 13-56
Almost Stock
Thread Starter
|
Elder User
Joined: May 2001
Posts: 760
Likes: 0
From: Billings, MT
Need part number if possible
That's alright man, I ended up just buying a hose and cutting it to fit. That was the easy part though. I must say that was the most difficult to attach hose I've ever worked with. It was embarrassing to me because I've helped rebuild engines, install lift kits, swap out engines, change differentials, yadda, yadda, yadda; but I couldn't get a little hose on. I ended up having to remove the water pump to get the angle I needed to attach the hose.
The Law
1989 F-250 HD 4x4
460, C6, BW 13-56
Almost Stock
The Law
1989 F-250 HD 4x4
460, C6, BW 13-56
Almost Stock
