block heater plug
Thread Starter
|
New User
Joined: Sep 2006
Posts: 5
Likes: 0
block heater plug
Ok, I'm tired of replacing the plug on my block heater. I bought a Marinco plug but now where to mount it. I would like it to stay on the driver's side of the vehicle. It takes a 1 7/8" hole. In the past I have seen pictures but I couldn't find those posts by doing a search. Just looking for a little input. I have a 2002 F-350.
Thread Starter
|
New User
Joined: Sep 2006
Posts: 5
Likes: 0
This is the type of plug that mounts to the body so it's a hard mount. Not the old floppy plug.http://overtons.com/modperl/product/...ew&i=34531&aID=
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
That's a nice looking plug. Your either going to have to drill a hole or mount a bracket to accommodate that thing. I may put one of those on mine since I've got a Ranch Hand bumper it will be a lot easier for me to install a bracket and mount.
Good luck.
Good luck.
Elder User
Joined: Dec 2007
Posts: 784
Likes: 1
From: White Rock BC Canaduh
CaptPicky,
The link below might help you out. It looks like a good layout to me.
http://www.forgotton.net/diesel/marinco/index.htm
The link below might help you out. It looks like a good layout to me.
http://www.forgotton.net/diesel/marinco/index.htm
