Transmission problem???HELP!
Thread Starter
|
New User
Joined: Jan 2008
Posts: 5
Likes: 0
Transmission problem???HELP!
Recently i had replaced my flywheel on my 78 f-150. It has 460 motor with c6 tranny. We got the torque convertor bolts to lin up with the flywheel and we got the nub to line up and all the bolt holes were lined up. We had all bolts threaded into the hole, but one side would not thread in. The transmission was like 1/4" gap from motor. After doing this the motor would not turn over by hand? Any suggestions? thanks.
