Torker Intake

Reply Subscribe

Thread Tools

Search this Thread

Dec 27, 2007 | 09:41 PM

lifted77f250

Thread Starter

Senior User

Joined: Apr 2004

Posts: 270

Likes: 0

From: pittsburgh,pa

Torker Intake

What are your thoughts on the Edelbrock Torker intake for the FE? I got one and was thinking of putting on my 390GT in my mustang. Its definitely lighter than the stock 4v intake which is a plus. I believe its a single plane. I am just curious if its worth using, like what are the advantages?

Thanks
Jason

Dec 27, 2007 | 09:52 PM

Bear 45/70

Post Fiend

Joined: Mar 2004

Posts: 6,056

Likes: 8

From: Union, Washington

The GT motor will probably not really make the most of that intake.

Dec 27, 2007 | 10:52 PM

Dave Severson

Posting Guru

Joined: Nov 2005

Posts: 1,302

Likes: 0

From: Madison, SD

An single plane intake is made for engines operating at higher RPM ranges, won't get any power gains till about 2500 RPM and up. If my feeble memory is correct, I believe Edelbrock rates them for 3000 - 8000 RPM..... Probably not the normal operating range for a street engine.... About the only gain you would get would be weight reduction......

A dual plane intake such as the Edelbrock Performer or Performer RPM is a much better intake for the street.