Stack Kits, Stacks Yes or No

Reply Subscribe

Thread Tools

Search this Thread

Dec 27, 2007 | 12:47 AM

SS70ElCaminoOwner

Thread Starter

Senior User

Joined: Dec 2007

Posts: 162

Likes: 0

From: Rochester, New York

Stack Kits, Stacks Yes or No

This is my first post, not sure where to put it..

This is my first diesel truck. It was a Lemon Law exchange for a 2006 V10 F350.

I now have 25,000 miles on it, and use it to pull an enclosed car trailer.

I am interested in putting a set of 4 or 5 inch Chrome Turnout exhaust stacks for my 2007 F-350 Ford Power Stroke 6.0.

I would also like a plate or box to cover the “Y” pipe in the bed.

I have been doing some research and done a search on the forum. It looks like Grand Rock produces a quality product ( http://www.grpipes.com/powerflow.asp ).

I would like the height to be no higher the 84” from the ground as I want to still be able to go through the car wash. This is a 4X4 truck so the top of the tip will just be above the roofline.

I do not want LOUD. I had hopes of coming out of the stock muffler, doing a 180-degree turn, run back along the muffler to a point to go through the bed. The stock pipe is welded to the muffler so that will not work.

Suggestions?

Why can I not do attachments?

Thanks Glenn

Glenn R. Lever
Rochester, New York 14617-2012
My Cars http://www.leverfamilysite.com/vehicles.htm
Control arm Info http://www.leverfamilysite.com/GM_A_body.htm