Shocks
Thread Starter
|
New User
Joined: Jan 2007
Posts: 18
Likes: 0
Shocks
Im looking at buying some new QA-1 shocks for my 92 F-150. Only issue is that I dont have time to take the shocks off to compress them to check the ride heigth so I can get the shocks set to specs. I already measured from eye hole to the top strut and its 15 inches. Does anyone have any suggestions on how I can make a good guess at hitting the right measurement for specs?
Last edited by Hobbybigred; Dec 13, 2007 at 10:00 AM.
Thread Starter
|
New User
Joined: Jan 2007
Posts: 18
Likes: 0
wow I just read back over that and it made no sense. OK LETS TRY IT AGAIN. Im buying new shocks for my truck, In order to get the specs set for the new shocks that im buying, I have to get the specs for the old shocks that are on the truck now and im trying to find the best way to get that done without having to take the shocks off that are on there now. Hopefully that explains it better!!!
