I need Help!!

Reply Subscribe

Thread Tools

Search this Thread

Dec 10, 2007 | 08:28 AM

knash0727

Thread Starter

Elder User

Joined: Sep 2007

Posts: 518

Likes: 0

From: Huntsville, TX

I need Help!!

So I got in my truck this morning and headed off to work. On the way it started raining. I turned the windshield wipers on and they worked for a few minuets but then the driver side just stopped in mid sweep. I turned them off, pulled over and pushed the wiper back down and it went down fine, but then I turned them back on and neither would come up. I took the arms off and the connectors are not damaged. What could be the problem?<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com

ffice

ffice" /><o

></o

Dec 10, 2007 | 02:58 PM

mikem55

Freshman User

Joined: Nov 2007

Posts: 44

Likes: 0

From: bedias tx

wipers

probly the ground. mine do that every once in a while

Dec 10, 2007 | 03:38 PM

PLC7.3

Post Fiend

Joined: Nov 2004

Posts: 5,638

Likes: 1

From: Manitoba

Probably the locking clip holding the LH/RH wiper pivot shaft arms to the motor crank arm has fallen off. If you can move one wiper without the other moving that would give you the sign...... If both move then it could be the bolt holding them to the crank motor arm on the wiper motor.

Dec 10, 2007 | 04:01 PM

knash0727

Thread Starter

Elder User

Joined: Sep 2007

Posts: 518

Likes: 0

From: Huntsville, TX

Thanks, Ill check when I get home

Dec 10, 2007 | 06:43 PM

knash0727

Thread Starter

Elder User

Joined: Sep 2007

Posts: 518

Likes: 0

From: Huntsville, TX

How do I get the cowl panel off?

Dec 10, 2007 | 07:46 PM

Franklin2

Moderator

Joined: Jan 2001

Posts: 56,999

Likes: 2,747

From: Virginia

On the earlier 80's models, there were screws around the front edge. Then you pull it forward out from under the windshield chrome. I assume the later models are the same.