Starter Replacement Advice
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 335
Likes: 1
From: Richmond, Texas
Starter Replacement Advice
I'm looking at replacing my starter with "Higher Torque" starter from DB Electrical off of Ebay. It was recommended to me from a memeber of this board, but I wanted to know if anyone else was using one of these. Also, how hard is it to replace the starter on these trucks? (2000 F250)
Smokin
Joined: Jun 2006
Posts: 8,849
Likes: 0
Captain,
Not sure what to tell you on the high torque starters...i've heard a lot about them but I just changed my starter out and decided to go with standard Motorcraft.
The starter's on these aren't hard. It's located right next to the oil pan on the starboard side. It's a standard three big bolts, battery connection and live wire which is a really tiny 8 MM I believe. The big bolts are 18MM. Just make sure you disconnect your batteries before pulling out the old starter unless you like the smell of burning human hair.
The only real trouble I had was getting up in there to get the top bolt out..and you may need an open-ended 18MM. My truck is lifted and I had to squeeze myself in between the tire, leaf spring and frame sitting on my butt inside the wheel well to get the leverage I needed...but I do have short arms and had to use my 18MM socket so it wasn't an easy job trying to do it lying on my back.
Not sure what to tell you on the high torque starters...i've heard a lot about them but I just changed my starter out and decided to go with standard Motorcraft.
The starter's on these aren't hard. It's located right next to the oil pan on the starboard side. It's a standard three big bolts, battery connection and live wire which is a really tiny 8 MM I believe. The big bolts are 18MM. Just make sure you disconnect your batteries before pulling out the old starter unless you like the smell of burning human hair.
The only real trouble I had was getting up in there to get the top bolt out..and you may need an open-ended 18MM. My truck is lifted and I had to squeeze myself in between the tire, leaf spring and frame sitting on my butt inside the wheel well to get the leverage I needed...but I do have short arms and had to use my 18MM socket so it wasn't an easy job trying to do it lying on my back.
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 335
Likes: 1
From: Richmond, Texas
The reason I was asking about the price is because the "higher torque" starter I found online is $130 + shipping. If I have it over-nighted, I'll pay about the same price as I would buying a motorcraft.
Posting Guru
Joined: Aug 2005
Posts: 1,768
Likes: 0
From: Central Alabama
Make sure you use the red locktite on the threads, I had one of my starter bolts back out on me and I chewed up my starter.
Trending Topics
Lead Driver
Joined: May 2007
Posts: 5,613
Likes: 9
From: Flagstaff, Arizona
if your truck is lifted.....the hardest part of the removal/install is finding the right position to sit up....and fish your wrench around finding the top bolt to remove. It was very uncomfortable for me.....but the starter install/removal part is EASY. Just unhook battery...and there's 3 bolts.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 335
Likes: 1
From: Richmond, Texas
Here's the link: http://cgi.ebay.com/ebaymotors/NEW-F...QQcmdZViewItem
The guy selling these recommended a Denso high torque starter, but I didn't see them in his online store.
The guy selling these recommended a Denso high torque starter, but I didn't see them in his online store.
Smokin
Joined: Jun 2006
Posts: 8,849
Likes: 0
It say's it'll replace the 3 bolt starter...but I don't buy it it doesn't even look like it will fit. Looks like it's an ambulance package starter or something.
Here is what your stock unit looks like...
http://www.dieselfiltersonline.com/S...r-Str7006.aspx
I'd like to hear from someone who has replaced their OEM starter with one of these dudes.
Here is what your stock unit looks like...
http://www.dieselfiltersonline.com/S...r-Str7006.aspx
I'd like to hear from someone who has replaced their OEM starter with one of these dudes.
Postmaster
Joined: Sep 2006
Posts: 3,048
Likes: 1
i got one of those ebay jobs, and its great!!!!!!, it man handles the motor. belive me, thats the same guy i got it from ,DBelectrical, fast shipping too. love it, the only problem i had was the maion power wire has 90* bend in it and i had to make it straight for this one to fit, which was no problem.
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 335
Likes: 1
From: Richmond, Texas
Pete's the guy who told me about this starter. (Thanks for posting Pete, I couldn't remember who turned me on to this deal) How long have you had this starter?
Last edited by Capt.Schenk; Dec 10, 2007 at 03:39 PM.
