Wiring King Ranch Seats
#16
#18
#21
#22
#23
I have a 1996 f350 XLT that had the original lumbar support seats in them and I'm going for the king ranch seat swap. The king ranch seats have 5 wires on the drivers side and only 4 on the passengers side. I looked up the diagram on the website mentioned earlier but I'm still lost! Please help!
#24
I have a 1996 f350 XLT that had the original lumbar support seats in them and I'm going for the king ranch seat swap. The king ranch seats have 5 wires on the drivers side and only 4 on the passengers side. I looked up the diagram on the website mentioned earlier but I'm still lost! Please help!
#25
Black
Green
Red/Black
Brown/Light Blue
Light Blue/Pink
Passenger's side wires include:
Black
Light Blue/Pink
Red/Black
Black/Yellow
#27
05 King Ranch Seats
Hi Franklin this post is pretty old but I need some help. So I got a deal on 05 heated/ electric King ranch seats. I currently have 05 manual seats. I have the new harness already put in place for the new seats. Any tips on how to power them? Also the end of the wires that go towards the driver side are
Red/Green/Blue
Driver Side Harness
Same plug
#28
Trace that white/red stripe wire, I think it's the heater elements. It was fed by a relay hooked to key-on power.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
#29
Trace that white/red stripe wire, I think it's the heater elements. It was fed by a relay hooked to key-on power.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
so the white with red stripe goes to passenger side plug. But my color choices I have to power the seats from the driver side part of the harness are Red Green and Blue with a red stripe
#30
Also
Trace that white/red stripe wire, I think it's the heater elements. It was fed by a relay hooked to key-on power.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
Green was the 30 amp feed, power all the time that feeds the selector switches for the motors on the driver's side
Black with white stripe was the 30 amp feed for the pass side switches and motors.
Solid black was ground on both sides.
also Franklin we have power to the driver side but none to the passenger. Can we cut the white with red stripe wire to power that side