New to site
Thread Starter
|
New User
Joined: Nov 2007
Posts: 1
Likes: 0
New to site
just posting to say im new, obviously.
Im in parts gathering and research stage of my 52 F-1 project, plans are 4.6 3v w/5r55, cpp frame, air ride, ect... if anyone has done a 4.6 3v implant already,( or subject has already been covered in a previous thread), could u direct me to the thread?
Im in parts gathering and research stage of my 52 F-1 project, plans are 4.6 3v w/5r55, cpp frame, air ride, ect... if anyone has done a 4.6 3v implant already,( or subject has already been covered in a previous thread), could u direct me to the thread?
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Hello and Welcome! 
Try this forum: https://www.ford-trucks.com/forums/forum41/ There is also this one: https://www.ford-trucks.com/forums/forum136/ There is a ton of help in the tech forums (Forums tab at the upper left) that can help you out with any question you may have. You also have support from your state chapter: https://www.ford-trucks.com/forums/forum175/
Enjoy!
Try this forum: https://www.ford-trucks.com/forums/forum41/ There is also this one: https://www.ford-trucks.com/forums/forum136/ There is a ton of help in the tech forums (Forums tab at the upper left) that can help you out with any question you may have. You also have support from your state chapter: https://www.ford-trucks.com/forums/forum175/
Enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
pepperonipizza
New Member Introductions
1
Mar 29, 2007 05:32 PM
