Wait to start light
Thread Starter
|
New User
Joined: Mar 2007
Posts: 2
Likes: 0
Wait to start light
This morning I started my truck fine and then the engine stopped. I found the fuse #30 blown. It kept blowing fuses every time the ingition was turned on. I unpluged the fuel heater and fuse quit blowing. But now I have no wait to start light and checked glow plug relay and I have constant power to one big post, ignition power to one small post, and nothing to other small post. I think it requires a ground to one small post, but where does it get the ground. And now I can plug up the fuel heater and it doesn't blow the fuse. I still have no wait to start or glow plugs. Could someone recommend how to fix.
Postmaster
Joined: Jan 2005
Posts: 4,743
Likes: 3
From: Peoria, IL
You may want to try posting this in the 7.3L forum, there are a lot of guys in there that know there stuff.
Go to the main forum page and scroll down about half way and you should see it. Here is a link in case you can't find it.
https://www.ford-trucks.com/forums/forum31/
Go to the main forum page and scroll down about half way and you should see it. Here is a link in case you can't find it.
https://www.ford-trucks.com/forums/forum31/
