EFI Exhaust Manifolds
Thread Starter
|
New User
Joined: Jul 2002
Posts: 11
Likes: 0
From: NE Pennsylvannia
EFI Exhaust Manifolds
I'm in the process of adding a Clifford intake w/ EFI exhaust manifolds from an '88 on my'84. As luck would have it I now have 2 sets of them. If I can't return one of the sets to the junkie do any of you guys think there is a market for them? I paid $80 bucks for the one set.
Thanks,
Jim K
'84 F150 I6
260* Comp Cam
In Progress: Clifford Intake w/ Holley 2bbl 350cfm EFI Exhaust manifold
Thanks,
Jim K
'84 F150 I6
260* Comp Cam
In Progress: Clifford Intake w/ Holley 2bbl 350cfm EFI Exhaust manifold
Senior User
Joined: Jul 2001
Posts: 470
Likes: 0
EFI Exhaust Manifolds
What you might want to do is get in there with a grinder and port the hell out of them, then swap them with the unported set on your truck (assumption). Then try and sell the stockers on ebay or on here...
-=Whittey=-
-=Whittey=-
Thread Starter
|
New User
Joined: Jul 2002
Posts: 11
Likes: 0
From: NE Pennsylvannia
EFI Exhaust Manifolds
My plan is definately to port them, neither set are installed as yet. Currently the stock (except for the porting :-) '84 single piece unit is on the motor. I just need to pick up a set of gaskets to do the port matching. As far as porting although I am working from memory I will say that the single piece design has a lot more material to remove.
If you have you seen the efi's on eBay, etc what was the avg asking price?
Jim K
If you have you seen the efi's on eBay, etc what was the avg asking price?
Jim K
