large oil leak
Post Fiend
Joined: Jul 2005
Posts: 14,582
Likes: 12
From: 21791
If it is coming between the pump body and the aluminum fitting, then it's an o-ring, but if it's between the fitting and the quick disconnect (STC) fitting then you need a new line, and a new fitting too.
Thread Starter
|
Elder User
Joined: Sep 2006
Posts: 852
Likes: 0
From: ARIZONA
this blows, local ford stealer wants 150 bucks for the drivers side HPOP line, but i called a diesel shop and he will fix it parts and labor for 95 bucks, whats the deal......
been 2 days and have went through over half gallon of oil. and local shop cant get it in till Monday.......................so im babing it till then in hopes it doesnt blow completely off.
been 2 days and have went through over half gallon of oil. and local shop cant get it in till Monday.......................so im babing it till then in hopes it doesnt blow completely off.
Post Fiend
Joined: Jul 2005
Posts: 14,582
Likes: 12
From: 21791
I know what you mean. I had a shredded o-ring on the bottom of my R-IPR for my terminator pumps (Joey told me to take it off to inspect something before i installed it, and i attempted to fix it till midnight on wednesday night, i lost over 6 quarts within about 40 miles. Still got some puddling so i know i didnt get it. 
