Some help installing gauges??
Thread Starter
|
Senior User
Joined: Sep 2005
Posts: 388
Likes: 0
Some help installing gauges??
With my Spartan tuner (that's on it's way) I ordered an EGT Gauge along with a new boost gauge and a tranny temp gauge..
Is there a site, or documentation written up, that makes the install of these gauges a bit easier?? Because the directions that came with them BLOWS.
I've got an 06 F350.
Thanks guys!!!
Is there a site, or documentation written up, that makes the install of these gauges a bit easier?? Because the directions that came with them BLOWS.
I've got an 06 F350.
Thanks guys!!!
Postmaster
Joined: Dec 2003
Posts: 4,196
Likes: 10
From: Arizona
Originally Posted by JB666Rock
With my Spartan tuner (that's on it's way) I ordered an EGT Gauge along with a new boost gauge and a tranny temp gauge..
Is there a site, or documentation written up, that makes the install of these gauges a bit easier?? Because the directions that came with them BLOWS.
I've got an 06 F350.
Thanks guys!!!
Is there a site, or documentation written up, that makes the install of these gauges a bit easier?? Because the directions that came with them BLOWS.
I've got an 06 F350.
Thanks guys!!!
http://www.dieselmanor.com/diy/PSD3-...60gauge-p1.htm
Thread Starter
|
Senior User
Joined: Sep 2005
Posts: 388
Likes: 0
This is true -- I bought everything from Spartan. They were so cool, and easy to deal with, that I just ordered what I needed in one shot. I didn't go with the traditional pillar gauge pod, I got the type that mounts on the ceiling over your rear view mirror. I didn't want to lose my grab handle or my pillar tweeters.
BTW, thanks for the link!! I went there already, but it's not the easiest place to print out the entire set of instructions.
BTW, thanks for the link!! I went there already, but it's not the easiest place to print out the entire set of instructions.
Originally Posted by blackhat620
I am guessing you did not purchase the gauges from Diesel Manor. Here is the link to install
www.dieselmanor.com/diy/PSD3-gauge/PSD60gauge-p1.htm
www.dieselmanor.com/diy/PSD3-gauge/PSD60gauge-p1.htm
Postmaster
Joined: Dec 2003
Posts: 4,196
Likes: 10
From: Arizona
Here is a thread started yesterday with install pictures and writeup also
http://www.ford-trucks.com/forums/66...e-install.html.
Or you could always take it to Matt and have him do the install, except you may be drawn into diesel mod syndrome.
http://www.ford-trucks.com/forums/66...e-install.html.
Or you could always take it to Matt and have him do the install, except you may be drawn into diesel mod syndrome.
