king ranch
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Welcome! 
If this is a gasser then you need to prime the system. Turning the ignition on for about 5 seconds, turn off and repeat 4 or 5 times and then try and start it. If you need more be sure to use the tech forums. Click on the Forums tab at the upper left and find your application.
Good Luck!
If this is a gasser then you need to prime the system. Turning the ignition on for about 5 seconds, turn off and repeat 4 or 5 times and then try and start it. If you need more be sure to use the tech forums. Click on the Forums tab at the upper left and find your application.
Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
