Melling Camshaft
Thread Starter
|
Posting Guru
Joined: Mar 2007
Posts: 1,757
Likes: 2
From: Florida
Melling Camshaft
I'm looking at a new Melling MTF-5 Camshaft on ebay...the specs are Duration at .050, Int. 204, Exh. 214, Adv. duration Int. 280, Exh. 290. Valve lift Int. .448. Exh. .472, Center lobe Int. 107 Exh. 117. ........It says it's only for 1962-1985...does that make the cam a solid roller or Hydraulic Flat tappet?Thanks
Senior User
Joined: Jun 2006
Posts: 388
Likes: 1
From: Murfreesboro, TN
I think your 95 5.0 might be a roller cam. Might want to find out beforehand by pulling a valve cover and removing a pushrod to measure. If it measures ~6.25" it has a roller cam in it. 6.87" is a flat tappet cam. I just ordered this cam to put in my 5.0 since I have the old firing order small lift cam (.380intake, .395exhaust):
http://www.northernautoparts.com/Pro...tModelId=11115
It's also speed density friendly with teh lobe seperation (115*)
http://www.northernautoparts.com/Pro...tModelId=11115
It's also speed density friendly with teh lobe seperation (115*)
Thread
Thread Starter
Forum
Replies
Last Post
daflentge
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
19
Oct 13, 2006 04:02 PM
Dyerstown
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Apr 10, 2004 11:37 PM
Superdave
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
16
Oct 1, 2003 11:31 PM
