Bearing Problems w/ the 4.6 engine
Thread Starter
|
New User
Joined: May 2002
Posts: 3
Likes: 0
From: Kona USA
Bearing Problems w/ the 4.6 engine
Well, I find it rather interesting that I've posted this twice on your site, seen it up on the board, only to have it deleted by someone on that end the next day
What's up with that guys????
Anyway, to the meat of things. I got a feeling that Ford is going to have to start a silent recal on the 4.6 in the future. My engine in my 97' F150 has crashed with bad bearings after only 45K miles. And you could drink my oil I kept it so clean. Two others in the Ford shop here as we speak. One in a Mustang, the other a van...both with the same problem. That was $5K out of my pocket and I don't like it Now I'm hearing about a couple in another county...so...anybody hear of the same problem? Let me know...
What's up with that guys????Anyway, to the meat of things. I got a feeling that Ford is going to have to start a silent recal on the 4.6 in the future. My engine in my 97' F150 has crashed with bad bearings after only 45K miles. And you could drink my oil I kept it so clean. Two others in the Ford shop here as we speak. One in a Mustang, the other a van...both with the same problem. That was $5K out of my pocket and I don't like it
Now I'm hearing about a couple in another county...so...anybody hear of the same problem? Let me know...
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Bearing Problems w/ the 4.6 engine
[updated:LAST EDITED ON 19-May-02 AT 00:05 AM (EST)]Truckin2 you need to talk to the moderator if you feel you are being bumped. Sounds like you not posting in the correct fashion.
With that said, I have heard of zero problems with the bearings on the 4.6. Sounds like something is not quite right here. My 4.6 has 170,000 on it. My wife drives mostly it but when I drive it I max it out.
With that said, I have heard of zero problems with the bearings on the 4.6. Sounds like something is not quite right here. My 4.6 has 170,000 on it. My wife drives mostly it but when I drive it I max it out.
Freshman User
Joined: Apr 2002
Posts: 32
Likes: 0
From: Kansas City USA
Bearing Problems w/ the 4.6 engine
I havn't heard anything, I have a 1998 Grand Marquis 130k, 1997 F150 75k, and 1994 Crown Vic 255k, all with 4.6L and never had any internal engine problem. Your dealer may be BS'n you.
New User
Joined: May 2002
Posts: 7
Likes: 0
Bearing Problems w/ the 4.6 engine
97, 60000 and I use it as a daily driver. I also keep the oil clean, since I pull a race car. I have noticed a tappet or lifter starting to knock. Other than that I haven't had any problems with the engine, my problems have all been electrical.
