Engine identification

Reply Subscribe

Thread Tools

Search this Thread

Oct 13, 2007 | 03:48 PM

BruceGillen

Thread Starter

New User

Joined: Mar 2007

Posts: 6

Likes: 0

Engine identification

Have a V8 in my 4WD 1985 F150 w/1987 2WD cab. Where do I look to ID what size engine I really have ? Thanks

Oct 13, 2007 | 09:45 PM

Franklin2

Moderator

Joined: Jan 2001

Posts: 56,999

Likes: 2,747

From: Virginia

It won't be a 460, unless someone swapped it in. 460's only came in f250's and up. So normally it's going to be a 302 or 351w. But some people are not "normal", and it could have anything in it, including a chevy engine.

Is the distributor up front? How many bolts hold the valve cover on?

Oct 14, 2007 | 08:17 AM

BruceGillen

Thread Starter

New User

Joined: Mar 2007

Posts: 6

Likes: 0

Quote:

Originally Posted by Franklin2

The distributor is in front - 6 bolts hold down the valve covers

Oct 14, 2007 | 12:24 PM

gearhead351

Elder User

Joined: Dec 2005

Posts: 557

Likes: 0

Quote:

Originally Posted by BruceGillen

The distributor is in front - 6 bolts hold down the valve covers

You have a 302 or a 351 windsor. The difference between the two is A 351W has a taller deck height 9.5" inch vs. 8.2" inch for the 302. It has 1/2" inch head bolts instead of the 302's 7/16" inch head bolts. The easiest way to tell is do the heads go onto the block almost touching the timing cover, or is there about an inch space between the heads and the cover? heres a photo if that doenst all make sense to you. This is my 351 Windsor.

http://i143.photobucket.com/albums/r...truck005-1.jpg