5.8 FSB engine rebuild
Thread Starter
|
Carpenter Local 745
Joined: Apr 2006
Posts: 5,794
Likes: 11
From: on da beach
5.8 FSB engine rebuild
In a year or so I need to have my 5.8 rebuild for my FSB.
The FSB is the 96 in my sig. I was wondering what will be a reasonable overbore for my EFI based engine.
I will have all the bearings replaced and have the heads redone or replaced.
Is there a better cam profile that will work with the computer? I would like more hp.
The FSB is the 96 in my sig. I was wondering what will be a reasonable overbore for my EFI based engine.
I will have all the bearings replaced and have the heads redone or replaced.
Is there a better cam profile that will work with the computer? I would like more hp.
Hotshot
Joined: May 2003
Posts: 11,141
Likes: 25
From: south louisiana
It's already got a pretty good roller cam now, the specs are 256/266 advertised duration (not at .050) lift is .422/.445. Add 1.7 full roller pedestal rockers like Crane's p/n 44746-16 gets the lift to .445/.473. LSA is 116*.
Thread
Thread Starter
Forum
Replies
Last Post
sirkt
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Jul 11, 2008 12:27 AM
