ignition system?????
Thread Starter
|
New User
Joined: Sep 2007
Posts: 15
Likes: 0
From: Milton, FL
ignition system?????
i have a 2.3 efi from a 91 stang to put in my 88 ranger 2.0....
any tips or suggestions for wiring in the computer from the stang into the ranger?
how hard?, what should I expect to run into?
plug and play or am i gonna have some hard core wire tracing to do?
any tips or suggestions for wiring in the computer from the stang into the ranger?
how hard?, what should I expect to run into?
plug and play or am i gonna have some hard core wire tracing to do?
Posting Guru
Joined: Feb 2006
Posts: 1,448
Likes: 1
You are going to have wiring problems with the ignition system. Two entirely different animals. If it were me, I would get a wiring diagram for each vehicle, and make the appropriate changes. You can possible adapt the Mustang harness and make it easier.
The 2.3 is fuel injected. The 2.0 is a carbed engine. You will need to change your fuel system to supply fuel to the 2.3. jd
The 2.3 is fuel injected. The 2.0 is a carbed engine. You will need to change your fuel system to supply fuel to the 2.3. jd
