forward or reverse
Thread Starter
|
New User
Joined: Feb 2006
Posts: 4
Likes: 0
forward or reverse
<TABLE><TBODY><TR><TD vAlign=top width="100%">I am looking to upgrade to 4.10s from 3.55's in my 92 f150, i dont know if the front ring gear is forward or reverse cut . any body with any pointers?
</TD></TR></TBODY></TABLE>
</TD></TR></TBODY></TABLE>
Hotshot
Joined: Dec 2003
Posts: 18,423
Likes: 9
From: iowa
it changed back in the early 70s on the D44 front ends for ford. The rest use standard rotation gears in the fronts but ford went to the high pinion setup requiring reverse cut gears. You can tell pretty easily, in your case it's real easy cause all the TtB type axles used the reverse high pinion center sections. But look at the pinion itself it if goes into teh case above the center line it's a high pinion and uses the reverse cut gears.
