I need help.
Thread Starter
|
New User
Joined: Jun 2007
Posts: 14
Likes: 0
I need help.
I am at a loss with this truck. It had sat for about a year with a motor that had started acting like it was out of time one morning and eventually stopped running all together. So recently I swapped in a motor that was running when it was pulled. The engine will crank and act like it wants to start but wont fire. It has spark, timing was never changed from when it was running, I have checked and double checked all connections. Please keep in mind this truck was originally an automatic however we swapped in a manual and left the neutral safety switch in place. I have checked the codes on the truck and the only ones the computer throws are related to the transmission. Does anyone have any ideas? Also under the dash coming through the firewall is three wires (red,red/green stripe,blue)that has a round connector..what does it go to? Could this be the problem?
I should add that this is a 1991 F250 with a 460.
I should add that this is a 1991 F250 with a 460.
Last edited by dragonslayerfx; Oct 4, 2007 at 04:58 PM.
