Porting heads

Reply Subscribe

Thread Tools

Search this Thread

Jul 1, 2002 | 05:16 AM

jowilker

Thread Starter

Fleet Owner

Joined: Jun 1999

Posts: 24,552

Likes: 74

From: Creedmoor, North Carolina

Porting heads

Aug 3, 2002 | 01:04 AM

lsrjf

Junior User

Joined: Nov 2001

Posts: 75

Likes: 0

From: alabama

Porting heads

Where can i go to get good info on porting and polishing my 390 heads or can some of you give me some info about it and also a source for the rocker arm shaft and rockers and what about roller rockers for these motors.

thanks Jeff

Aug 3, 2002 | 02:06 AM

thndertruck

Freshman User

Joined: May 2002

Posts: 36

Likes: 0

From: BOULDER CITY USA

Porting heads

There is a post with a link to Standard Abrasives in this forum, but I dont remember which one. If you go to STANDARDABRASIVES.COM then click on the "funny car" and then "do it yourself" (I think) it will take you to a whole section that will basicly walk you through port and polishing your heads and intake. Sorry for so little info, mabey someone else knows more links on the subject. Good luck on your project.