RHD power steer
Post Fiend
Joined: Jul 2006
Posts: 6,948
Likes: 44
I had a right hand drive ford (think the guy made it) in my shop a couple of years back, and wanted a crossover steering conversion. I used a saginaw box from a donor GM 2wd truck. These boxes mount on the outboard side of the left side frame rail, which is a pefect candidate for an inboard mounted right side application. A simple steering arm for the driverside is available aftermarket and will accomodate a crossover easily with no machine work to the knucke (D44, D60 is just as easy)
This works well for 4wd trucks, if you have a 2wd truck, and the box mounts at the end of the column, you can't use a bit of my advice. No good, worthless, back to the drawing board............
This works well for 4wd trucks, if you have a 2wd truck, and the box mounts at the end of the column, you can't use a bit of my advice. No good, worthless, back to the drawing board............
