no power from key
Thread Starter
|
New User
Joined: Aug 2006
Posts: 3
Likes: 0
no power from key
I'm stumped! this is my first post I have an '89 F250 460 4x4. Ijust replaced actuator in steering column and when I put it back together the fuel pump doesn't kick in or does the blinkers work. I replaced the ignition switch on the column and the key switch also. Iam not getting any power at the plug that goes to the ignition switch. I do not know what else to check. Any help would be appreciated.
Senior User
Joined: Jun 2006
Posts: 493
Likes: 0
You need to trace that wire back to find out where it gets it's power from. If it has any fusesable links or fuses you need to check that they are still good. You may also want to check you battery connections. Do you have any power? It may be that simple.
Post Fiend
Joined: May 2004
Posts: 11,289
Likes: 6
From: Lakewood, Ohio
working on wiring = need for battery disconnect.
you blew a fuse or multiple fuses and maybe the inertia switch.
what were you thinking?
every manual has disconnect the battery if working on electrical like a hundred times.
you blew a fuse or multiple fuses and maybe the inertia switch.
what were you thinking?
every manual has disconnect the battery if working on electrical like a hundred times.
