need help getting started
Thread Starter
|
New User
Joined: Aug 2007
Posts: 2
Likes: 0
need help getting started
I have a 2000 F150 4x4 with a 5.4L that i have had for about 5 years. I is completely stock, except for a K&N air filter and a flowmaster muffler. I just bought a car so I can start workin on the truck. Anyone have any suggestions as to where I should start. I would like to start small and work my way up. Any help is greatly appreciated
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Welcome to the forum 
Lower gears like 4.10's will help a lot. A Programmer such as a Diablosport Predator will help as well. A cold air intake like the Outlaw Power unit is nice too. I have all of these except the gears and mine runs much better. Then you can look into electric fans, and maybe long tube headers.
Lower gears like 4.10's will help a lot. A Programmer such as a Diablosport Predator will help as well. A cold air intake like the Outlaw Power unit is nice too. I have all of these except the gears and mine runs much better. Then you can look into electric fans, and maybe long tube headers.
Fleet Mechanic
Joined: Mar 2007
Posts: 1,398
Likes: 1
From: Simi Valley, CA
lift! fabtech or dixon bros..those arent exactly small but man are they gunna look sweet! some wheels and 35"s, i have the fabtech 6 inch, its sweet! functions quite well, but id recomend gears and a programmer if you go with a lift, cuz mines a little slow now 
