nailer45
Thread Starter
|
New User
Joined: Jul 2007
Posts: 1
Likes: 0
From: Western PA
nailer45
Hello everyone,
Just joined and looking forward learning from all of you and sharing what experiences I have had. I am the proud owner of a 2004 Superduty SC long bed PSD FX4. With 32k under my belt and the warranty gone I'm ready to start with my mods. I did have my share of bugs at the beginning, but most were resolved within 5000k, although I did sneak into the dealer for one last fix before the time ran out... a new injector harness. I'm planning on a ProComp 4" lift with new 18" wheels and 35" tires to start with. P.S. Hope I'm not too old to be here, I just turned 50 but feel like a 20 year old.
Just joined and looking forward learning from all of you and sharing what experiences I have had. I am the proud owner of a 2004 Superduty SC long bed PSD FX4. With 32k under my belt and the warranty gone I'm ready to start with my mods. I did have my share of bugs at the beginning, but most were resolved within 5000k, although I did sneak into the dealer for one last fix before the time ran out... a new injector harness. I'm planning on a ProComp 4" lift with new 18" wheels and 35" tires to start with. P.S. Hope I'm not too old to be here, I just turned 50 but feel like a 20 year old.
FTE Leadership Emeritus
Joined: May 2004
Posts: 18,787
Likes: 30
From: Melbourne, Aus
Welcome!
You certainly aren't too old, especially if you have a lifted PSD SuperDuty
Check out the 6.0l PSD and SuperDuty sections.
Oh, and don't forget your local chapter at the bottom of the main forum page, to find fellow Ford Enthusiasts
You certainly aren't too old, especially if you have a lifted PSD SuperDuty
Check out the 6.0l PSD and SuperDuty sections.
Oh, and don't forget your local chapter at the bottom of the main forum page, to find fellow Ford Enthusiasts
Thread
Thread Starter
Forum
Replies
Last Post
