4.5" Donahoe Racing Install Help??
#1
4.5" Donahoe Racing Install Help??
Alright. After being pressured by the guys at work, and mostly by myself, I think it is coming down to the time that I need to just bite the bullet, if I can afford it. I need to seriously know how difficult of an install this is? I am pretty mechanically inclined, just never installed a lift before. Also, is there anything outside of the tool area that I would need extra besides what comes with the kit, brake lines, etc? Also, what would I gain by having it installed? If I get it installed from somewhere it will probably be Woodlands Performance. Anyone use them? Any and all info would be greatly appreciated.
Thanks,
Johnny aka Bulldog68
Thanks,
Johnny aka Bulldog68
#2
#3
I did my truck by myself. Never had done a lift before, so it was all new to me. I did have a fair amount of self taught mechanical experience with cars. I used a standard pitman arm puller. I just modified it with a grinder and gave it a little push to get it on. You will need some big sockets...I can't remember the exact sizes.
I assume you are talking about Woodlands Performance in Texas. If not disregard the following about them, but the Truck Toyz stuff still applies. I talked to them and they were a little more expensive than Marty at Truck Toyz even with Marty shipping the stuff. I was very pleased with my experience with Marty. Answered all my newby questions and returned my calls/pm's promptly.
I assume you are talking about Woodlands Performance in Texas. If not disregard the following about them, but the Truck Toyz stuff still applies. I talked to them and they were a little more expensive than Marty at Truck Toyz even with Marty shipping the stuff. I was very pleased with my experience with Marty. Answered all my newby questions and returned my calls/pm's promptly.
Thread
Thread Starter
Forum
Replies
Last Post
Bulldog f150
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
29
02-07-2014 09:44 AM
matt71
1994.5 - 1997 7.3L Power Stroke Diesel
19
11-09-2010 04:02 PM