Bent Coils?
Thread Starter
|
New User
Joined: Jan 2005
Posts: 10
Likes: 0
Bent Coils?
I just installed a four inch Superlift stage two with their superrunner steering system. After this the camber was way off and on the passenger side the spring is not traveling perpendicular to the ground but rather has some bend in it. Is this just a problem with the camber or is something installed incorrectly?
Thanks,
Thanks,
Post Fiend
Joined: Mar 2002
Posts: 19,402
Likes: 38
From: Bonita Springs FL
Camber is important if you want your tires to wear properly. Who installed the lift? If you did it yourself, get it to an alignment shop that knows how to deal with lifted trucks.
The spring may or may not have been installed properly. How far off is it?
The spring may or may not have been installed properly. How far off is it?
Postmaster
Joined: Jul 2006
Posts: 3,978
Likes: 0
From: Central PA
Did you get the chamber shim kit with it? But you will haveto take to a good shop that has worked om alignments with lifts. I know my National local brake /alignment is a joke. I use the mom and pops and have had better luck
