Question.....
Thread Starter
|
Freshman User
Joined: Mar 2007
Posts: 44
Likes: 1
From: Arco, Idaho
Question.....
Anybody recommend an engine machine shop that KNOWS Fords, actually gives a d@mn about precision and taking the time and care to do a job right, over here in SE Idaho? I live in Blackfoot, could take the work anywhere from Twin Falls to Ashton to get the right work done.
Got a 1969 351W that's going into a Mustang, and want to go through a 400M and a 300 six, but don't want to waste precious bucks on second rate work.....
Got a 1969 351W that's going into a Mustang, and want to go through a 400M and a 300 six, but don't want to waste precious bucks on second rate work.....
Senior User
Joined: Jun 2003
Posts: 351
Likes: 0
From: Star, Idaho
If you lived in Boise or were willing to travel here, I would recommend Moffitt and Bratton. Pat Bratton is building my 434 stroker and has a lot of knowledge in Fords and racing engines in general.
