HELP! Can anyone offer advice or contact info, I have a 5.0 that is down to 30psi on #8. I have a 5.8 on a stand that I would like to put in. I am new to wrenching so I would like to be sure I don't miss something. What parts interchange between engines, what needs changed, etc etc. Any help would be appreciated, right now it is me & my Chiltons. Tim Morgan

 

check the archives, there are many posts on this subject as this swap is done often.

 

I just did the swap on an 84 but did not have to comply with emissions so it was much easier. let me know if i can help.