tire rubing problems
Elder User
Joined: Mar 2006
Posts: 590
Likes: 1
From: Venetia, PA
Ive seen as big as 32 inchers on em. I think 11.5 is about as wide as you would want to go on stock rims. I run 265/75R15s (31x10.5) on stock 8" rims. They seem to fill the wells nice and dont look like overkill.
Senior User
Joined: Mar 2007
Posts: 181
Likes: 0
From: P.N.W. / Wa.
......i have had 32x11.50x15's on my stock 15x7.5 rim's and ran without a hitch when it was all at stock ....... [ pic's in my gallery show's and even has the pic's of the BFG's; before i went through with this 4"LIFT & changed to 33x12.50x15's MT's on 15x10" MT classic II wheel's].......
mr. Charles
.
mr. Charles
.
Postmaster
Joined: Jul 2006
Posts: 3,978
Likes: 0
From: Central PA
Any tire may rub radius arms . But some of these trucks came with 31's and 265/75/15 tires you can run 32' tires on stock rims will/may rub rad arms . But if highway driving no problem. But if you are going to bigger /wider then 10" I'd get wider rims with little more offset.
LOST
LOST
Last edited by lostin90s; Jul 21, 2007 at 09:00 AM.
