Rotor help
Senior User
Joined: Dec 2006
Posts: 136
Likes: 0
From: Lima Ohio for college
becarefull if you use a pully because it will fly off the hub with alot of speed. it happend to me. best thing to do is get pb blaster and soak it between the hub and rotor. leave it over night and try to pound it off. hope this helps
Junior User
Joined: Aug 2004
Posts: 54
Likes: 0
From: Delaware
If you do a lot of banging on the rotors make sure you check your tye rod ends and all of the steering parts. A buddy of mine had a guy hit the rotors with a small sledge and after all the brakes where fixed about a week later he lost steering when his tye rod end came apart. He was lucky he was not going to fast. Both tires pointed in. Just a word of caution..........
Ron
Ron
