water outlet
Thread Starter
|
Senior User
Joined: Dec 2005
Posts: 216
Likes: 0
From: boondocks, tennessee
water outlet
i have a 400 that came out of a 79 F250 that i am building. i was looking online today at advance auto parts website and i noticed that all the water outlets have threaded holes on them. what are these holes for. when i got my motor it was in bad shape, and it had no water outlet on it. if it matters i am not using any of the OE emissions junk. thanks
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
Temperature vacuum switches for the vacuum advance and temperature senders. Most people don't have any idea what is OE emissions "junk" and what isn't and how to make the engine controls function properly.
Last edited by Torque1st; Jul 17, 2007 at 04:29 PM.
Thread Starter
|
Senior User
Joined: Dec 2005
Posts: 216
Likes: 0
From: boondocks, tennessee
ok so i bought a water neck today and it has a threaded hole on top and one on the right side. the water neck also came with two plugs to cap off either or both of the holes. so what needs to go where? do i need to use both outlets or just one or neither?
