dist. wiring
Thread Starter
|
Junior User
Joined: Mar 2007
Posts: 94
Likes: 0
From: Chico
dist. wiring
Hey I swaped my old 351M for a 460 and Im almost done putting in the 460(finally) and I just hooked up the dist. wiring and I cant remember what these little plugs comming out of the wiring harness are. There are two of them, and I even took a picture of them so everyone knows what im talking about.
Shot with KODAK CX7430 ZOOM DIGITAL CAMERA at 2007-07-13
Shot with KODAK CX7430 ZOOM DIGITAL CAMERA at 2007-07-13
Last edited by 78'Ranger; Jul 13, 2007 at 11:05 PM.
Laughing Gas
Joined: Dec 2000
Posts: 781
Likes: 18
From: East Texas
Those appear to be the plugs that attach to the smaller terminals (S) and (I) on the starter solenoid. Don't remember right off hand which color goes which terminal.
On edit: Could also be the plug for the temperature sender, based on the apparent position in the picture.
On edit: Could also be the plug for the temperature sender, based on the apparent position in the picture.
Last edited by firstonraceday; Jul 14, 2007 at 06:38 AM.
Thread Starter
|
Junior User
Joined: Mar 2007
Posts: 94
Likes: 0
From: Chico
Originally Posted by 78workhorse
Its late and I'm going to bed. I can't help with the wires right now but I just gotta ask.....How did you get your thumb to bend that way? Thats amazing!
