Rotor issue
Thread Starter
|
New User
Joined: Mar 2004
Posts: 17
Likes: 0
Rotor issue
I can't get the rotors off of my 2001 F250 4X4. I read a few post and they both said that they need a little persuasion.
I would appriciate some help in defining the amount of persuaion needed. I want to change the ball joints but I do not want to damage my rotors in the process.
I would appriciate some help in defining the amount of persuaion needed. I want to change the ball joints but I do not want to damage my rotors in the process.
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 23,174
Likes: 1,678
From: Stephensville WI
Sure, where the rotor mates to the hub.
If you don't have a mallet, use a block of 2x4 and a sledge hammer. Set the wood against the rotor and beat on the wood.
Also, swearing helps.
If you don't have a mallet, use a block of 2x4 and a sledge hammer. Set the wood against the rotor and beat on the wood.
Also, swearing helps.
