Striker Plate
Thread Starter
|
Freshman User
Joined: Jun 2007
Posts: 25
Likes: 0
From: Herald, CA
Striker Plate
Can someone tell me how to remove the door striker plate on my 53, the shop manual shows a phillips head screw but it looks more like a two circle together (like a infinity symbol). Is there somewhere I can buy this tool?
Thanks
Thanks
Mountain Pass
Joined: Aug 2006
Posts: 216
Likes: 18
From: Central NC
sounds like a 'clutch head' screw...
NAPA, Sears, etc should sell either a screwdriver or a bit set to fit... i think i would go with a bit set for versatility.
scroll down this page
http://www.sizes.com/tools/screw_drive.htm
NAPA, Sears, etc should sell either a screwdriver or a bit set to fit... i think i would go with a bit set for versatility.
scroll down this page
http://www.sizes.com/tools/screw_drive.htm
Last edited by ghall; Jul 9, 2007 at 12:53 PM. Reason: add link
