here are the specs stock e7 heads f4te cam 351w .30 over bbk shortes touquer intake 650 cfm carb . what should my hp and tq be and at what rpm .thanks im trying to figure out if this would be a good low end tq hp combo .

 

i ran it on my old desk top 2000 version 3.10. With stock heads roller FTE camshaft, 660 cfm, dual plane intake, and headers with mufflers. It will make a little over 400 ft lbs at 2000 rpms, and about 270 hp at 4000 rpms

 

so going with the stock e7 heads i get more tq at such a low rpm right

 

nah thats the cam doing that... cam determines rpm range, displacement determines torque, heads and induction just control flow.

 

400 ftlbs tq at 2000 rpm thats quite a bit .

 

Yeah.. that a bit optimistic for a carb'd motor IMO. I bet it'll come close to that number, just higher in the rpm range.. more like 3000-3500rpm. It's usually the EFI motors with the long runner intakes that make big TQ down low like that.

 

**** i would be loving 400 ftlbs of tq at 2000 rpms .