393 stroker questions
Thread Starter
|
Senior User
Joined: Nov 2001
Posts: 196
Likes: 0
From: beverly, Ohio
393 stroker questions
I,m thinking of building a 351w stroked to a 393. I,m lookin for big block torque from a small block. can I get high torque using stock heads (casting D5TE). later down the road I plan on buying some aftermarket heads, but for now I'll have to settle with the stock ones.
Another question I have is when the 302 pistons are used with the 3.85 stroke crank and windsor rods do you get the advertised compression ratio. If not can someone point me in the direction on how to figure comp. ratio.
Another question I have is when the 302 pistons are used with the 3.85 stroke crank and windsor rods do you get the advertised compression ratio. If not can someone point me in the direction on how to figure comp. ratio.
