interior trim pieces
Thread Starter
|
New User
Joined: Jun 2007
Posts: 6
Likes: 0
interior trim pieces
i have a 93 ford f 150 4x4 and the plastic trim that goes up the pillar and over the passenger door is cracked at its lowest mounting point to make a long story short ive tried glueing it with several different types of glue but no luck and the rattle it makes is driving me crazy.. ive been to several different scrap yards but all the trim pieces ive found seem to have the same problem.., is there any source of new interior trim pieces?
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Posting Guru
Joined: Mar 2007
Posts: 1,757
Likes: 2
From: Florida
Senior User
Joined: Jun 2007
Posts: 159
Likes: 0
From: Hallandale Beach
Bud if you carefully remove the trim piece you can fix it from the backside with any one of the two part epoxy puttys. Its the stuff they sell in a cylinder that looks like clay. JB weld, loctite, etc...make it. The JB weld is gray in color if it matters. Most auto parts stores have them in the adhesive section. They setup in about 5 mins so you dont have to hold it for long. less then $5 and the rattle will be gone!
B
B
